¿Cómo se compra en línea?
Consulta aquí
Pasos de envío
Pasos de compra
Querétaro, Qro - (hace 1 año)
Victor Martinez
Una buena opción para comprar calzado industrial, excelente el trato y atención de el personal y tienen muy buenos precios no solo en calzado si no en productos de ferretería
Querétaro, Qro - (hace 2 años)
Buen surtido a precios accesibles. Agradable atención. Lo recomiendo
Querétaro, Qro - (hace 1 año)
JC Soto
Buen servicio
Querétaro, Qro - (hace 2 años)
Marco Flores
Buenos precios en las fotos
FAQ´S
How high are the shoe sizes?
The sizes found on the page are the typical numbering in Mexico, therefore this refers to CM.
Is the polyamide pointer less resistant than the steel one?
Both pointers have the same residence, approximately 450 kg. The polyamide bushing despite having dielectric properties, it also has much lower weight.
How can I know what shoe size I am?
Step 1) Correct foot placement. Use a blank sheet of paper taped to a wall. Firmly rest your heel against the wall maintaining an upright and firm position.
Step 2) Marking. Use a pencil placed vertically to the longest finger (it doesn't always have to be the thumb) and make the mark.
Step 3) Measurement. With a tape measure or similar, carry out the measurement.
Step 4) Consult the equivalence table. Check the correspondence table to see what size corresponds to your measurement in centimeters.
Are there any recommendations for the use of dielectric footwear?
Yes, the recommendation is to use such footwear in electrical work that It is recommended to wear shoes with a dielectric bottom in those electrical work in which there is a risk of contact with live parts, provided that said footwear is one more element in the electrical protection chain, which also includes insulating gloves and insulated tools. It should be borne in mind that due to aging or wear protection can be lost, so the user is advised to check the electrical resistance at frequent and regular intervals, in the workplace.
Are there shoes to work in high temperatures?
Yes. The FUNCTIONAL footwear soles made of BIDENSITY RUBBER support up to 300 ° C, in fact they have an official certification for this specific risk, which the standard calls Heat Resistance by Contact and identifies it with the acronym HRO
What are the advantages of a footwear with a polyamide helmet?
Lighter. The non-metallic insole and toe cap achieve a lower weight than when it is metallic. This provides a lot of comfort and quite relieves the foot.
Greater thermal insulation. Because Steel is not a good thermal insulator and tends to be very susceptible to changes in temperature, they process this inside the footwear, on the other hand, polymers such as polyamide or polycarbonate achieve an important improvement with respect to thermal insulation; thus avoiding the conduction of heat or cold.
Response to crushing. Another very important characteristic is the response of the material after an impact. This type of materials, unlike steel, recover their original shape after an impact. This is very important since in this way the foot is not crushed and its exit is facilitated.
Resistant to corrosion. As it is not a metallic material there is no risk of oxidation.
Antistatic A static-free shoe is also achieved, thus increasing the user's safety.